Native N-glycome profiling of single cells and ng-level blood isolates using label-free capillary electrophoresis-mass spectrometry.

The development of reliable single-cell dispensers and substantial sensitivity improvement in mass spectrometry made proteomic profiling of individual cells achievable. Yet, there are no established methods for single-cell glycome analysis due to the inability to amplify glycans and sample losses associated with sample processing and glycan labeling. In this work, we present an integrated platform coupling online in-capillary sample processing with high-sensitivity label-free capillary electrophoresis-mass spectrometry for N-glycan profiling of single mammalian cells. Direct and unbiased quantitative characterization of single-cell surface N-glycomes are demonstrated for HeLa and U87 cells, with the detection of up to 100 N-glycans per single cell. Interestingly, N-glycome alterations are unequivocally detected at the single-cell level in HeLa and U87 cells stimulated with lipopolysaccharide. The developed workflow is also applied to the profiling of ng-level amounts (5-500 ng) of blood-derived protein, extracellular vesicle, and total plasma isolates, resulting in over 170, 220, and 370 quantitated N-glycans, respectively.

Graves' Disease: Acquired Cause of a Moderate Increase in Hemoglobin A2 Level.

BACKGROUND: Hyperthyroidism can lead to diverse hematological disorders, such as microcytosis and a mild increase in hemoglobin A2 fraction. METHODS: This study reported a 31-year-old woman of Moroccan origin recently diagnosed with Graves' disease. Her blood tests revealed microcytosis, hypochromia, and a normal ferritin level. A phenotypic analysis of hemo-globin was performed using two techniques: capillary electrophoresis and reversed-phase high performance liquid chromatography. RESULTS: Both techniques indicated a slight increase in hemoglobin A2 level. These results initially suggested het-erozygous beta-thalassemia, eventually correlating with the concurrent presence of Graves' disease, as evidenced by the normalization of hemoglobin A2 level following treatment. CONCLUSIONS: This case highlights the importance of having clinical, biological, and therapeutic data for a relevant interpretation of a phenotypic hemoglobin study.

[Annual review of capillary electrophoresis technology in 2023].

This paper serves as an annual review of capillary electrophoresis (CE) technology for 2023. The journals were selected based on their impact factor (IF), a universally recognized academic performance metric, combined with experimental work closely related to CE technology, to facilitate the rapid acquisition of significant research and application advancements in CE technology in 2023. A thematic search of the ISI Web of Science database yielded 669 research papers on CE technology published in 2023. This review highlights five experimental papers published in journals with IFs greater than 10.0, including Nature Communications, Nucleic Acids Research, Engineering, Journal of Medical Virology, and Carbohydrate Polymers, and 31 experimental papers from representative journals with IFs between 5.0 and 10.0, such as Analytical Chemistry, Analytica Chimica Acta, Talanta, and Food Chemistry. It also provides an overview of experimental research in journals with focused reporting on CE technology but with IFs less than 5.0, such as Journal of Chromatography A and Electrophoresis, as well as significant experimental research from key domestic Chinese core journals (Peking University). In 2023, all the latest scientific advancements reported in journals with an IF greater than 10.0 utilized previously reported CE methods, offering new breakthroughs for the promotion and application of CE technology. Additionally, new applications of CE in conjunction with mass spectrometry remained a hot topic. An increase in reports on the hardware aspects of CE, such as 3D printing and underwater systems, and significant breakthroughs in the analysis of non-solution samples, such as solid particles, cell vesicles, cells, viruses, and bacteria, was noted. CE is advantageous for the analysis of drugs and their components. In Chinese journals, the number of papers on CE applications exceeded that in previous years, with particular focus on the field of printing for new applications.

Research of saccharides and related biocomplexes: A review with recent techniques and applications.

Saccharides and biocompounds as saccharide (sugar) complexes have various roles and biological functions in living organisms due to modifications via nucleophilic substitution, polymerization, and complex formation reactions. Mostly, mono-, di-, oligo-, and polysaccharides are stabilized to inactive glycosides, which are formed in metabolic pathways. Natural saccharides are important in food and environmental monitoring. Glycosides with various functionalities are significant in clinical and medical research. Saccharides are often studied with the chromatographic methods of hydrophilic interaction liquid chromatography and anion exchange chromatograpy, but also with capillary electrophoresis and mass spectrometry with their on-line coupling systems. Sample preparation is important in the identification of saccharide compounds. The cases discussed here focus on bioscience, clinical, and food applications.

Dynamic Stomach Model-Capillary Electrophoresis-ICPMS for Evaluation of Release and Transformation Behaviors of Arsenic Species from Microplastics during Digestion.

Microplastics (MPs) can act as carriers of environmental arsenic species into the stomach with food and release arsenic species during digestion, which threatens human health. Herein, an integrated dynamic stomach model (DSM)-capillary electrophoresis-inductively coupled plasma mass spectrometry (CE-ICPMS) is developed for online monitoring of the release and transformation behaviors of arsenic species loaded on MPs (As-MPs) in the simulated human stomach. The 3D-printed DSM with a soft stomach chamber enables the behaviors of gastric peristalsis, gastric and salivary fluid addition, pH adjustment, and gastric emptying (GE) to be controlled by a self-written program after oral ingestion of food with As-MPs. The gastric extract during digestion is introduced into the spiral channel to remove the large particulate impurity and online filtered to obtain the clarified arsenic-containing solution for subsequent speciation analysis of arsenic by CE-ICPMS. The digestion conditions and pretreatment processes of DSM are tracked and validated, and the release rates of As-MPs digested by DSM are compared with those digested by the static stomach model and DSM without GE. The release rate of inorganic arsenic on MPs is higher than that of organic arsenic throughout the gastric digestion process, and 8% of As(V) is reduced to As(III). The detection limits for As(III), DMA, MMA, and As(V) are 0.5-0.9 µg L-1 using DSM-CE-ICPMS, along with precisions of ≤8%. This present method provides an integrated and convenient tool for evaluating the release and transformation of As-MPs during human gastric digestion and provides a reference for exploring the interactions between MPs and metals/metalloids in the human body.

Capillary Zone Electrophoresis in Humboldt Penguins (Spheniscus humboldti).

Electrophoresis is a useful diagnostic tool for detecting inflammation, including inflammation associated with infectious diseases (eg, aspergillosis in penguins). To our knowledge, reference intervals are not available for plasma proteins via electrophoresis in Humboldt penguins (Spheniscus humboldti). Therefore, preliminary reference intervals for blood plasma proteins measured by capillary zone electrophoresis were calculated for Humboldt penguins from a single zoological collection, and possible differences between the sexes and the ages of the birds were evaluated. Lithium heparinized plasma samples from 39 Humboldt penguins were analyzed. The following sex- and age-independent reference intervals were calculated: total protein 33.8-70.4 g/L, prealbumin 1.9-4.9 g/L, albumin 12.9-31.1 g/L, albumin: globulin ratio 0.7-1.7, α-globulins 4.5-11.6 g/L, ß-globulins 5.6-20.6 g/L, and γ-globulins 2.6-8.4 g/L. Male penguins had a significantly (P = 0.047) higher albumin: globulin ratio and lower percentage of ß-globulins (P = 0.015) in comparison with female penguins. Prealbumin (g/L) significantly (P = 0.021) decreased with increased age of the penguins. These results showed some differences between the sexes and ages of the penguins, which should be considered when interpreting the results. Further studies are needed to determine whether differences in other age groups or seasons exist, and also to evaluate which infectious diseases affect plasma proteins and how the reference values calculated here may deviate in ill penguins.

Determination of sulfonamide antibiotics by magnetic porous carbon solid-phase extraction coupled with capillary electrophoresis.

Sulfonamide antibiotics (SAs) have been widely used as antibacterial drugs for the prevention and treatment of livestock and poultry diseases, but they seriously threaten human health because they can accumulate in humans. Therefore, it is highly important to develop methods for monitoring sulfonamide residues in aquaculture and food. In this research, based on the generation of porous carbon (PC) by the pyrolysis of sodium citrate, magnetic porous carbon (PC@Fe3O4) was synthesized by a solvothermal method and used as an adsorbent for the magnetic solid-phase extraction of SAs. The effects of the proportion of PC in PC@Fe3O4, adsorbent dosage, adsorption time, eluent type, extraction pH, salt concentration and eluent dosage on the extraction efficiency were systematically studied. The adsorption performance and behavior of PC@Fe3O4 on SAs were evaluated using adsorption kinetics and adsorption isotherms, and the adsorption mechanism was preliminarily discussed. Under optimal conditions, combined with capillary electrophoresis diode array detection, a sensitive detection method for SAs was developed. The proposed method can be used for the determination of six SAs in fishpond water and milk samples, with a linear range of 0.5-200 ng mL-1, detection limits of 0.24-0.34 ng mL-1, and spiked recoveries of 85.9-109.0 %.

Influence of oligonucleotides structures for separation of diastereomers by capillary electrophoresis method using polyvinylpyrrolidone 1,300,000.

In the field of oligonucleotides drug discovery, phosphorothioate (PS) modification has been recognized as an effective tool to overcome the nuclease digestion, and generates 2n of possible diastereomers, where n equals the number of PS linkages. However, it is also well known that differences in drug efficacy and toxicity are caused by differences in stereochemistry of oligonucleotides. Therefore, the development of a high-resolution analytical method that enables stereo discrimination of oligonucleotides is desired. Under this circumstance, capillary electrophoresis (CE) using polyvinylpyrrolidone (PVP) is considered as one of the useful tools for the separation analysis of diastereomers. In this study, we evaluated the several oligonucleotides with the structural diversities in order to understand the separation mechanism of the diastereomers by CE. Especially, five kinds of 2'-moieties were deeply examined by CE with PVP 1,300,000 polymer solution. We found that different trend of the peak shapes and the peak resolution were observed among these oligonucleotides. For example, the better peak resolution was observed in 6 mer PS3-DNA compared to the rigid structure of 6 mer PS3-LNA. As for this reason, the computational simulation revealed that difference of accessible surface area caused by the steric structure of thiophosphate in each oligonucleotide is one of the key attributes to explain the separation of the diastereomers. In addition, we achieved the separation of sixteen peak tops of the diastereomers in 6 mer PS4-DNA, and the complete separation of fifteen diastereomers in 6 mer PS4-RNA. These knowledge for the separation of the diastereomers by CE will be expected to the quality control of the oligonucleotide drugs.

Development of a capillary zone electrophoresis method to monitor magnesium ion consumption during in vitro transcription for mRNA production.

Messenger RNA (mRNA) vaccines represent a landmark in vaccinology, especially with their success in COVID-19 vaccines, which have shown great promise for future vaccine development and disease prevention. As a platform technology, synthetic mRNA can be produced with high fidelity using in vitro transcription (IVT). Magnesium plays a vital role in the IVT process, facilitating the phosphodiester bond formation between adjacent nucleotides and ensuring accurate transcription to produce high-quality mRNA. The development of the IVT process has prompted key inquiries about in-process characterization of magnesium ion (Mg++) consumption, relating to the RNA polymerase (RNAP) activation, fed-batch mode production yield, and mRNA quality. Hence, it becomes crucial to monitor the free Mg++ concentration throughout the IVT process. However, no free Mg++ analysis method has been reported for complex IVT reactions. Here we report a robust capillary zone electrophoresis (CZE) method with indirect UV detection. The assay allows accurate quantitation of free Mg++ for the complex IVT reaction where it is essential to preserve IVT samples in their native-like state during analysis to avoid dissociation of bound Mg complexes. By applying this CZE method, the relationships between free Mg++ concentration, the mRNA yield, and dsRNA impurity level were investigated. Such mechanistic understanding facilitates informed decisions regarding the quantity and timing of feeding starting materials to increase the yield. Furthermore, this approach can serve as a platform method for analyzing the free Mg++ in complex sample matrices where preserving the native-like state of Mg++ binding is key for accurate quantitation.

Machine learning evaluation for identification of M-proteins in human serum.

Serum electrophoresis (SPEP) is a method used to analyze the distribution of the most important proteins in the blood. The major clinical question is the presence of monoclonal fraction(s) of antibodies (M-protein/paraprotein), which is essential for the diagnosis and follow-up of hematological diseases, such as multiple myeloma. Recent studies have shown that machine learning can be used to assess protein electrophoresis by, for example, examining protein glycan patterns to follow up tumor surgery. In this study we compared 26 different decision tree algorithms to identify the presence of M-proteins in human serum by using numerical data from serum protein capillary electrophoresis. For the automated detection and clustering of data, we used an anonymized data set consisting of 67,073 samples. We found five methods with superior ability to detect M-proteins: Extra Trees (ET), Random Forest (RF), Histogram Grading Boosting Regressor (HGBR), Light Gradient Boosting Method (LGBM), and Extreme Gradient Boosting (XGB). Additionally, we implemented a game theoretic approach to disclose which features in the data set that were indicative of the resulting M-protein diagnosis. The results verified the gamma globulin fraction and part of the beta globulin fraction as the most important features of the electrophoresis analysis, thereby further strengthening the reliability of our approach. Finally, we tested the algorithms for classifying the M-protein isotypes, where ET and XGB showed the best performance out of the five algorithms tested. Our results show that serum capillary electrophoresis combined with decision tree algorithms have great potential in the application of rapid and accurate identification of M-proteins. Moreover, these methods would be applicable for a variety of blood analyses, such as hemoglobinopathies, indicating a wide-range diagnostic use. However, for M-protein isotype classification, combining machine learning solutions for numerical data from capillary electrophoresis with gel electrophoresis image data would be most advantageous.

[Deep eutectic solvents synergistic with carboxymethyl -ß-cyclodextrin on the improvement of chiral separation of metoprolol by capillary electrophoresis].

The physical and chemical properties of chiral drugs are very similar. However, their pharmacological and toxicological effects vary significantly. For example, one enantiomer may have favorable properties whereas the other may be ineffective or even have toxic side effects. Hence, exploring innovative strategies to improve enantiomeric resolution is of great importance. Metoprolol (MET) is a ß-receptor blocker used to treat hypertension, stable angina pectoris, and supraventricular tachyarrhythmia. Establishing chiral separation and analysis methods of MET enantiomers is important for enhancing the quality of chiral drugs. Capillary electrophoresis (CE) has the advantages of a small sample size, simple operation, high separation efficiency, and many alternative modes; therefore it is widely used in the field of chiral drug separation. The chiral selectors commonly used for CE-based chiral separation include cyclodextrin (CD) and its derivatives, polysaccharides, proteins, and macrocyclic antibiotics. CD is one of the most commonly used and effective chiral selectors for CE. The relatively hydrophobic structure inside the cavity and the relatively hydrophilic structure outside the cavity of CD enable it and chiral molecules to form inclusion compounds with different binding constants, thus achieving chiral separation. However, the use of CD alone as a chiral selector does not always yield satisfactory separation results. Hence, the addition of other additives, such as ionic liquids and deep eutectic solvents (DESs) to assist CD-based chiral separation systems has received extensive attention. Previous studies on the enantiomeric separation of MET by CE have focused on the addition of CD and its derivatives alone for separation. Few studies have been conducted on the synergistic addition of auxiliary additives to CD to improve the enantiomeric resolution of MET. In this study, three DESs, namely, choline chloride-D-glucose, choline chloride-D-fructose, and lactate-D-glucose, were used for the CE-based chiral separation of MET for the first time, and the synergistic effect of the DESs on the separation of MET enantiomers by CD-based capillary zone electrophoresis was speculated. For this purpose, an uncoated fused silica capillary with inner diameter of 50 µm, total length of 50 cm and effective length of 41.5 cm was used as the separation column. First, the effects of CD type, CD concentration, buffer pH, and buffer concentration on MET separation were investigated, and the optimal conditions (15 mmol/L carboxymethyl-ß-cyclodextrin (CM-ß-CD), pH=3.0, and 40 mmol/L phosphate buffer) were obtained. Other CE conditions were as follows: UV detection at 230 nm, applied voltage of 25 kV. All operations were carried out at 20 ℃. Next, three types of DESs were prepared as auxiliary additives via a mixed-heating method. The DESs were mixed in a 50 mL round-bottomed flask at a certain molar ratio and then heated in a water bath at 80 ℃ for 3 h until a clear and transparent liquid was obtained. The effects of different DESs and their mass fraction on chiral separation were subsequently studied. The optimal choline chloride-D-fructose mass fraction was ultimately determined to be 1.5%. The resolution of MET increased from 1.30 without DES to 2.61 with 1.5% choline chloride-D-fructose, thereby achieving baseline separation. Finally, the separation effect and mechanism were speculated. The MET chiral separation method established in this study is of great significance for improving the quality of chiral compounds and ensuring the safety and effectiveness of clinical drugs. Furthermore, it may be useful in the research and development of CE-based chiral separation techniques using CD derivatives with DESs.

Dextrin-assisted gel electromembrane extraction of chiral drugs: Improving the extraction efficiency and investigation of enantioselectivity of extraction.

The present study investigates the use of dextrins (maltodextrin, ß-cyclodextrin, and hydroxypropyl-ß-cyclodextrin) to improve the efficiency of the agarose-based gel electromembrane extraction technique for extracting chiral basic drugs (citalopram, hydroxyzine, and cetirizine). Additionally, it examines the enantioselectivity of the extraction process for these drugs. To achieve these, dextrins were incorporated into either the sample solution, the membrane, or the acceptor solution, and then the extraction procedure was performed. Enantiomers were separated and analyzed using a capillary electrophoresis device equipped with a UV detector. The results obtained under the optimal extraction conditions (sample solution pH: 4.0, acceptor solution pH: 2.0, gel membrane pH: 3.0, agarose concentration: 3 % w/v, stirring rate: 1000 rpm, gel thickness: 4.4 mm, extraction voltage: 62.3 V, and extraction time: 32.1 min) indicated that incorporating dextrins into either the sample solution, membrane or the acceptor solution enhances extraction efficiency by 17.3-23.1 %. The most significant increase was observed when hydroxypropyl-ß-cyclodextrin was added to the acceptor solution. The findings indicated that the inclusion of hydroxypropyl-ß-cyclodextrin in the sample solution resulted in an enantioselective extraction, yielding an enantiomeric excess of 6.42-7.14 %. The proposed method showed a linear range of 5.0-2000 ng/mL for enantiomers of model drugs. The limit of detection and limit of quantification for all enantiomers were found to be < 4.5 ng/mL and <15.0 ng/mL, respectively. Intra- and inter-day RSDs (n = 4) were less than 10.8 %, and the relative errors were less than 3.2 % for all the enantiomers. Finally, the developed method was successfully applied to determine concentrations of enantiomers in a urine sample with relative recoveries of 96.8-99.2 %, indicating good reliability of the developed method.

A fast and efficient method for screening and evaluation of hypoglycemic ingredients of Traditional Chinese Medicine acting on PTP1B by capillary electrophoresis.

As a pivotal enzyme that regulates dephosphorylation in cell activities and participates in the insulin signaling pathway, protein tyrosine phosphatase 1B (PTP1B) is considered to be an important target for the therapy of diabetes. In this work, a rapid and efficient inhibitor screening method of PTP1B was established based on capillary electrophoresis (CE), and used for screening and evaluating the inhibition effect of Traditional Chinese Medicine on PTP1B. Response Surface Methodology was used for optimizing the conditions of analysis. After method validation, the enzyme kinetic study and inhibition test were performed. As a result, the IC50 of PTP1B inhibitors Ⅳ and ⅩⅧ were consistent with reported values measured by a conventional method. It was found that the extracts of Astragalus membranaceus (Fisch) Bunge and Morus alba L. showed prominent inhibition on the activity of PTP1B, which were stronger than the positive controls. Meanwhile, on top of the excellent advantages of CE, the whole analysis time is less than 2 min. Thus, the results demonstrated that a fast and efficient screening method was successfully developed. This method could be a powerful tool for screening inhibitors from complex systems. It can also provide an effective basis for lead compound development in drug discovery.

Rapid evaluation of PHD2 inhibitory activity of natural products based on capillary electrophoresis online stacking strategy.

Prolyl hydroxylase domain 2 (PHD2) is an important enzyme in the human body that perceives changes in oxygen concentration and regulates response in hypoxic environments. Evaluation of PHD2 inhibitory activity of natural products is crucial for drug development of hypoxia related diseases. At present, the detection of low concentration of α-ketoglutaric acid (the substrate of PHD2 enzymatic reaction) requires derivatization reactions or sample pretreatment, which undoubtedly increases the workload of PHD2 inhibitory activity evaluation. In this paper, a direct detection approach of α-ketoglutaric acid was established by using the online stacking strategy of capillary electrophoresis to evaluate the PHD2 inhibitory activity of natural products. Under optimized conditions, detection of a single sample can be achieved within 2 min. By calculation, the intraday precision RSD of the apparent electrophoretic mobility and peak areas of α-ketoglutaric acid are 0.92 % and 0.79 %, respectively, and the interday RSD were 1.27 % and 0.96 % respectively. The recoveries of the present approach were 97.9-105.2 %, and the LOQ and LOD were 2.0 µM and 5.0 µM, respectively. Furthermore, this approach was applied for the evaluation of inhibitory activity of PHD2 for 13 natural products, and PHD2 inhibitory activity of salvianolic acid A was firstly reported. The present work not only realizes evaluation of PHD2 inhibitory activity through direct detection of α-ketoglutaric acid, but also provides technical support for the discovery of potential drug molecules in hypoxia related diseases.

Capillary electrophoresis using triple layer modified capillary facilitating salivary ion analyses: Application to search for potential stress markers induced by cold pressure test.

In this study, we introduce a novel approach for the analysis of salivary ions using capillary electrophoresis (CE) with a triple-layer coated capillary. The capillary is sequentially coated with cationic silylating reagents, poly(vinylsulfonate), and polybrene to form a custom designed surface that effectively inhibits adsorption of protein matrix on the capillary inner wall and allows for reproducible ion analysis. For the CE with capacitively coupled contactless conductivity detection, we used suitable background electrolytes (BGEs) for salivary ion analysis. Anions were separated using a mixture of 2-(N-morpholino)ethanesulfonic acid and l-arginine, and cations were separated using that with 18-crown-6. This setup enabled rapid separation, within 4 min, together with sensitive detection. We quantified nine common anions and five cations typically found in saliva samples using this CE method, both before and after a cold pressure test (CPT, a standard stress test). The CE system demonstrated consistent ion separation across 30 consecutive measurements without requiring capillary replacement. Notably, the salivary ion balance remained predominantly anion-rich, regardless of the CPT. Cold water exposure induced greater variation in the total anion concentration than in the total cation concentration. Further analysis using multiple regression analysis revealed strong relationships between nitrate and nitrite, formate and phosphate, and potassium and nitrate, before and after the CPT. Notably, potassium and nitrate ions exhibited variations in response to stress. These results provided a method for assessing salivary ion composition and insights into the potential of salivary ions as biomarkers for stress.

Magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers for ultrarapid determination of ractopamine residues from food samples by capillary electrophoresis.

An ultrafast, efficient, and eco-friendly method combining magnetic solid phase extraction and capillary electrophoresis with diode array detection have been developed to determine ractopamine residues in food samples. A restricted access material based on magnetic and mesoporous molecularly imprinted polymer has been properly synthesized and characterized, demonstrating excellent selectivity and high adsorbent capacity. Short-end injection capillary electrophoresis method was optimized: 75 mM triethylamine pH 7 as BGE, -20 kV, 50 mbar by hydrodynamic injection during 8 s, and capillary temperature at 25 °C; reaching ultrafast ractopamine analysis (∼0.6 min) with good peak asymmetry, and free from interfering and/or baseline noise. After sample preparation optimization, the conditions were: 1000 µL of sample at pH 6, 20 mg of adsorbent, stirring time of 120 s, 250 µL of ultrapure water as washing solvent, 1000 µL of methanol: acetic acid (7: 3, v/v) as eluent, and the adsorbent can be reused four times. In these conditions, the analytical method showed recoveries around to 100 %, linearity ranged from 9.74 to 974.0 µg kg-1, correlation coefficient (r) ≥ 0,99 in addition to adequate precision, accuracy, and robustness. After proper validation, the method was successfully applied in the analysis ractopamine residues in bovine milk and bovine and porcine muscle.

A preliminary report on the exploration of salivary bacterial diversity by the multiplex SNaPshot assay.

Salivary bacterial community composition is associated with the host's internal and environmental factors, which have potential applications in forensic practice. The 16S rRNA gene sequencing is the most commonly used strategy for detecting salivary bacterial diversity; however, its platforms are not compatible with capillary electrophoresis (CE) platforms commonly used for forensic applications. Therefore, we attempted to detect the salivary bacterial diversity using a single nucleotide polymorphism (SNP) assay. Salivary bacterial diversity varies among diverse geographic locations, making it a potential supplementary biomarker for forensic geographic sourcing. To evaluate the performance of the multiplex SNaPshot assay, saliva samples from three geographic locations in China were analyzed using the multiplex SNaPshot assay and 16S rRNA gene sequencing. We screened SNPs from two high-relative-abundance salivary genera (Streptococcus and Veillonella) to construct a multiplex SNaPshot system that can be used on the CE platform. The stability and sensitivity of the multiplex SNaPshot system were also tested. A random forest classification model was used to classify samples from different regions to explore the ability of salivary bacteria to discriminate between geographic sources. Six bacterial SNPs were screened and a multiplex SNaPshot system was constructed. The stability results showed that the typing of salivary stains that were placed indoors for different days was not affected in this study. Two-thirds of mocked salivary stain samples showed more than 90% of typing results obtained for salivary stain samples with an input of 0.1 µl saliva. The results of principal coordinate analysis based on salivary bacterial diversity showed significant differences between samples from the three different geographic locations. The accuracy of the random forest classification was 66.67% based on the multiplex SNaPshot assay and 83.33% based on the 16S rRNA gene sequencing. In conclusion, this is the first attempt to detect salivary bacterial diversity using a multiplex SNaPshot bacterial SNP assay. The geographic difference in human salivary bacterial community composition was significant, as revealed by the multiplex SNaPshot assay; however, its performance in discriminating geographic sources was lower than that of 16S rRNA gene sequencing. This strategy based on bacterial SNP loci may favor the detection of human bacterial diversity in common forensic laboratories but requires further exploration in larger sample sizes and more bacterial SNP loci.

Investigating cationic and zwitterionic successive multiple ionic-polymer layer coatings for protein separation by capillary electrophoresis.

Successive multiple ionic-polymer layers (SMILs) have long since proved their worth in capillary electrophoresis as they ensure stable electroosmotic flow (EOF) and relatively high separation efficiency. Recently, we demonstrated that plotting the plate height (H) against the solute migration velocity (u) enabled a reliable quantitative evaluation of the coating performances in terms of separation efficiency. In this work, various physicochemical and chemical parameters of the SMIL coating were studied and optimized in order to decrease the slope of the ascending part of the H vs u curve, which is known to be controlled by the homogeneity in charge of the coating surface and by the possible residual solute adsorption onto the coating surface. SMILs based on poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium styrene sulfonate) (PSS) were formed and the effect of each polyelectrolyte molar mass and of the number of polyelectrolyte layers (up to 21 layers) was studied. The use of polyethylene imine as an anchoring first layer was considered. More polyelectrolyte couples based on PDADMAC, polybrene, PSS, poly(vinyl sulfate), and poly(acrylic acid) were tested. Finally, zwitterionic polymers based on the poly(α-l-lysine) scaffold were synthesized and used as the last layer of SMILs, illustrating their ability to finetune the EOF, while maintaining good separation efficiency.

Sensitive detection of herbicide residues using field-amplified sample injection coupled with electrokinetic supercharging in flow-gated capillary electrophoresis.

Residues of glyphosate (GlyP) and its major degradation product, aminomethylphosphonic acid (AMPA), widely exist in the water system and plant products and thus are also present in the bodies of animals and humans. Although no solid evidence has been obtained, the concern about the cancer risk of GlyP is persistent. The measurement of GlyP and AMPA in trace levels is often needed but lacks readily available analytical approaches with detection sensitivity, accuracy and speed. This study aims to develop a simple and robust technique for the sensitive detection of GlyP and AMPA residues in a surface water system with flow-gated capillary electrophoresis (CE). Experimentally, water samples were first fluorogenically derivatized with 4-fluoro-7-nitrobenzofurazan (NBD-F) in a low-conductivity buffer at room temperature, and the mixture was injected and concentrated in the capillary based on field-amplified sample injection (FASI) coupled with electrokinetic supercharging (EKS). This scheme included a step of sample buffer injection upon electroosmotic pumping, where negatively charged analytes were electrophoretically rejected, followed by automatic voltage reversal for FASI-EKS. The detection sensitivity was improved by 296, 444, and 861 times for glufosinate (GluF), AMPA, and GlyP, respectively. The proposed method was validated in terms of accuracy, precision, limits of detection (LODs), and linearity. The LODs were estimated to be 50.0 pM, 5.0 pM, and 10.0 pM for GluF, AMPA, and GlyP, respectively. Its application was demonstrated by measuring GluF and AMPA in water samples collected from a local water system. This study provides an effective approach for the online preconcentration of negatively charged analytes, thus enabling the sensitive detection of herbicide residues in water samples. The method can also be applied to analyze other samples, including biological fluids and plant products, upon appropriate sample preparation such as solid phase extraction of analytes.

A new coaxial flow-through probe for electromembrane extraction of methadone from clinical samples on-line coupled to capillary electrophoresis.

BACKGROUND: A new design of a flow-through coaxial electromembrane extraction (EME) probe that can be on-line coupled with CE instrument is described and tested. The supporting base of the probe is a PDMS microchip with T-shaped channels into which two coaxially arranged capillaries for inlet and outlet solutions are inserted. The extraction part of the probe is a porous polypropylene hollow fiber, sealed at one end and modified with nitrophenyloctyl ether (NPOE) extraction fluid. The internal volume of the extraction probe is 1.1 µL. RESULTS: The EME probe was tested on laboratory samples and methadone was extracted into 3.0 M AcOH as acceptor. The concentration dependence was linear in the range of 0.1-1.0 µg mL-1 at EME 300 s/150 V and in the range of 0.5-10.0 µg mL-1 at EME 100 s/150 V. The enrichment factor was greater than 30 and the LOD was 0.21 µg mL-1. The EME of methadone in clinical samples showed a linear concentration dependence in human urine and a nonlinear concentration dependence in serum. The distribution of methadone in each phase of the extraction system and the effect of extraction membrane thickness on the enrichment factor were studied. The EME probe can be applied repeatedly. SIGNIFICANCE: The supporting base of EME probe and flow gating interface (FGI) are realized by a microfluidic PDMS microchips cast in the laboratory without the use of lithography. A supporting PDMS chip with coaxially arranged capillaries and extraction membrane forms a compact analytical instrument. The entire EME/CE analysis process is performed on a laboratory-made instrument and automated by LabView.